Phone : 1-800-378-4483







    Submitting Form...

    The server encountered an error.

    Form received.



Northeast Plastics Logo

Material Selection

Plastic Selection Help


The selection of a plastic material for a specific application can be a difficult task. After careful consideration, the possibilities may be narrowed to two or three candidates and the final selection is then determined

by testing.


The first and most important step in selecting a plastic material from the broad range of available materials (i.e., acrylic, polycarbonate, UHMW, Delrin, nylon, etc.) is to carefully define the requirements of the application, the physical properties required and the environment in which the material will need to perform.


The following list of questions or considerations should be used to define the application as completely as possible. In many cases, the answers to these criteria may be helpful to eliminate a particular plastic or an entire family of plastics. The more completely the application is defined, the better the chance of selecting the best material for the job.



Physical & Mechanical Considerations

   • What are the overall part dimensions (diameter, length, width, thickness)?

   • What load will the part have to carry?

   • Will the design carry high loads?

   • What will the highest load be?

   • What is the maximum stress on the part?

   • What kind of stress is it (tensile, flexural, etc.)?

   • How long will the load be applied?

   • Will the load be continuous or intermittent?

   • Does the part have to retain its dimensional shape?

   • What is the projected life of the part or design?


Thermal Considerations

   • What temperatures will the part see and for how long?

   • What is the maximum temperature the material must sustain?

   • What is the minimum temperature the material will sustain?

   • How long will the material be at these temperatures?

   • Will the material have to withstand impact at the low temperature?

   • What kind of dimensional stability is required (is thermal expansion and contraction an issue)?


Chemical Considerations

   • Will the material be exposed to chemicals or moisture?

   • Will the material be exposed to normal relative humidity?

   • Will the material be submerged in water? If so, at what temperature?

   • Will the material be exposed to steam?

   • Will the material be painted? If so, what kind of paint?

   • Will the material be glued? If so, what kind of adhesive will be used?

   • Will the material be submerged or wiped with solvents or other chemicals? If so, which ones?

   • Will the material be exposed to chemical or solvent vapors? If so, which If so, which ones?

   • Will the material be exposed to other materials that can outgas or leach detrimental materials, such

as plasticizers or petroleum-based chemicals?


Bearing and Wear Considerations

   • Will the material be used as a bearing? Will it need to resist wear?

   • Will the material be expected to perform as a bearing? If so, what will the load, shaft diameter, shaft

material, shaft finish, and rpm be?

   • What wear or abrasion condition will the material see? Note: Materials filled with friction

reducers (such as PTFE, molybdenum disulfide, or graphite) generally exhibit less wear in rubbing



Other Miscellaneous Considerations

   • Will the part have to meet any regulatory requirements?

       • FDA I USDA I Canada AG I 3A-Dairy I NSF I USP Class VI

   • Is UL94 Flame retardant rating required? What level?

       • 5VA I 5VB I V-0 I V-1 I V-2 I HB

   • Should the material have a special color and/or appearance?

       • Natural I White I Black I Other Colors

       • Color match to another part or material?

       • Window-Clear I Transparent I Translucent I Opaque

       • Smooth I Polished I Textured I One-Side or Both

   • Will the part be used outdoors?

   • Is UV Resistance needed?

   • Is static dissipation or conductivity important?

       • Insulator I Static Dissipative I Conductive



After answers to the above list of questions (or at least some of them) have been determined, please

contact us for further assistance. Our sales or engineering staff will be happy to help you choose one or

more available plastic materials that will meet your requirements. We stock almost all of the materials we sell, so we can provide samples or small pieces for your evaluation.





Phone: 800-378-4483  Fax: 215-637-2225


Northeast Plastics

633 Dunksferry Rd.

Unit B, Bensalem, PA 19020

Receive News from Northeast Plastics

© 2017  Northeast Plastic  I  633 Dunksferry Rd., Unit B, Bensalem, PA 19020  Terms & Conditions   I Sitemap

Submitting Form...

The server encountered an error.

Email received.

Northeast Plastics Logo
Northeast Plastics Logo